Skid Steer Backhoe

Posts Tagged ‘machine’

Bobcat skidsteer This is a rebuilt 1993 36hp 743B skidsteer. This machine was totally taken apart, bolt by bolt and component by component. The Kubota engine was rebuilt and all faulty parts on the machine were replaced. This machine is back to original factory condition. Also the entire machine has been painted inside and out.

Technorati Tags: 743B, Bobcat, kubota engine, machine, original factory, SkidSteer

The GS-ED-60-50 Sidedozer is a great little machine with lots of potential. It is uniquely designed to push dirt sideways to clean out from underneath guiderail and to backfill ditches. This machine is a must have for Townships and municipalities who need to make quick work of cleaning under guiderails. It is also a must have for contractors who need to quickly backfill ditches and trenches. It mounts easily to the front of any skidsteer and is ready to use in just minutes. Give us a call to see your next can’t live without machine.

Technorati Tags: backfill, ditches, GSED6050, guiderail, machine, road, Seigworth, Seigworth Road, Sidedozer, SkidSteer, Supply

A day spent in this machine is better than any other day in something else.

Technorati Tags: day, going, good, It's, machine, something

Another video of this tough little machine….

Technorati Tags: blogs, machine, Related, SkidSteer, T133, Thomas, Video

This is my Thomas Skidsteer. Video taken for potential buyer to see…. great mid sized machine!

Technorati Tags: blogs, buyer, machine, SkidSteer, T133, Thomas, Thomas Skidsteer, Video

I’ve decided to sell my Bobcat 975 skidsteer, a beast of a machine! I made this video to show the machine starting for the first time in a few months. It had been below freezing for over a week and into the teens the night prior. Working load: 3700lbs! Tipping load: 7400lbs!!!! Weight: over 12k lbs Hydraulic pump: 37.8 GPM Check it out on portland.craigslist.org (search for “bobcat 975″)

Technorati Tags: below, Bobcat, craigslist org, freezing, hydraulic pump, machine, Starting, weather.

I have an ASV / Cat skid steer loader. This machine is a track machine. The tracks run off of the same hydraulice motor as everything else. the tracks work fine, the lift works fine, but the bucket tilt will not operate. Two weeks ago I had the cylinders for the tilt, rebuilt. It was working fine. now, it will not move. it just dangles and flops around. I checked for leaks, there aren’t any. I pulled the hoses loose from the tilt and there is a lot of pressure. Should both lines on one cylinder be blowing fluid at the same time? I thought that one would suck while one pushes and when you move the joystick, vice versa. I might be wrong. well, that is why I am asking. Can anybody help me?
If this was the cylinder, it would be one or the other. not both at the same time, huh? I got a little more information. When my operator was using the machine, he had it in a bind up against a root. the bucket popped off of the root and he said it shook the heck out of the machine. that is when it quit working.

Technorati Tags: about, anybody, CAT, cat skid steer, caterpillar, controller, fine, hoses, Hydraulic, joystick, know, machine, skid steer loader, tilt

I have a 1998 ASV HD4520, skid steer loader. The bucket works on a manual, not electric, joystick controller. I had the lift cylinders rebuilt about two weeks ago. The machine has been working fine. Yesterday one of my workers was trying to get a piece of a stump out of the ground and the bucket popped off of the root and shook the hell out of the machine. Ever since that happened, the tilt on the bucket will not work. All of the hydraulics work off of the same motor. (tracks, lift, tilt, and aux.) Everything else is working fine. The tilt will only dangle when there is no pressure applied. There aren’t any leaks. I removed on line, there is pressure. no matter which direction I try to tilt it, it tilts downward. when I let off, it dangles. Can anyone tell me what is happening? I am lost. Thanks in advance. You can email me @ dstreedirtyahoo.com. Any literature on this would be greatly appreciated also.

Technorati Tags: anyone, bucket, fine, hydraulics, machine, skid steer loader, tilt, troubleshoot

slight turn left you have to push the lever more forward & it makes the machine jerkey.any advice

Technorati Tags: blogs, Bobcat, bobcat 751, controle, feather, forward, going, hand, inwhen, lever, machine, right, SkidSteer, turn, won't

When you find yourself in need of a piece of expensive equipment, sometimes you just don’t have the budget to purchase the equipment brand new. In that case, used equipment is the next option for you to consider. Now, don’t think that just because you are purchasing a piece of used equipment, like used skid steers, that you are getting short changed and not getting Read the rest of this entry »

Technorati Tags: Brand, Equipment, Holland, machine, maintenance schedule, new holland, new holland skid steer, size job